d&b 10D

d&b 10D

Installation specific four channel amplifier

  • Maximum output power 4 x 700 W into 4 Ω
  • All current d&b loudspeaker setups except A-Series, J-Series, SL-Series, V-Series, M2, B22-SUB
  • 5 freely assignable GPIOs (General Purpose Input Output) + General fault
카테고리: ,

설명

Digital Signal Processing
• Equalizer : 2 x 16-band,  PEQ / notch / shelving / asymmetric
• Latency analog and digital inputs : 0.3 msec.
• Delay setting : 0.3 msec – 10 sec.
• Configurations : Current d&b loudspeakers (except SL-Series, J-Series, V-Series, B2-SUB, M2 monitor) and linear mode
• Function switches : d&b loudspeaker specific circuits
• Frequency generator : Pink noise or Sine wave 10 Hz – 20 kHz
• SRC (Sample rate converter) : Selectable for AES 1/2 and 3/4
• Sampling rate : 96 kHz / 27 Bit ADC / 24 Bit DAC

Controls and indicators
• POWER : Mains power switch (rear panel)
• ISP, GR, OVL A/B : LED indicators

Connectors
• INPUT ANALOG (A1 – A4) : 3-pin Phoenix Euroblock male
• ANALOG LINK (A1 – A4) : 3-pin Phoenix Euroblock male
• INPUT DIGITAL (D1/2, D3/4) : 3-pin Phoenix Euroblock male, AES3
• DIGITAL LINK (Output) : 3-pin Phoenix Euroblock male
• Sampling Digital AES/EBU : 48 kHz / 96 kHz
• Speaker outputs A/B/C/D : 2 x 4-pin Phoenix Euroblock female
• Sampling rate : 48/96 kHz / 2 Ch/n
• Mix TOP/SUB / 2-Way Active output A/B and C/D : 2 x 4-pin Phoenix Euroblock female
• GPIO (General Purpose Input Output) : 1 x 6-pin Phoenix Euroblock male
• CAN : 2 x RJ 45 parallel
• ETHERNET : 2 x RJ 45, 10/100 Mbit Ethernet
• Mains connector : powerCON®
• General fault : 1 x 3-pin Phoenix Euroblock male

Data (linear setting with subsonic filter)
• Maximum output power per channel (THD+N <0.5% all channels driven) CF = 6 dB at 4 / 8 ohms : 4 x 700/350 W
• Maximum output power per channel (THD+N <0.5% all channels driven) CF = 12 dB at 4 / 8 ohms : 4 x 700/350 W
• S/N ratio (unweighted, RMS) Analog input : > 101 dBr
• S/N ratio (unweighted, RMS) Digital input : > 103 dBr

Power supply
• Type : Universal range switched mode power supply with active power factor correction (PFC)
• Rated mains voltage : 100 – 240 V, 50 – 60 Hz

Dimensions / weight
• Dimensions (H x W x D) : 2 RU x 19″ x 435 mm
• Weight : 10.6 kg